Mechanical Engineering Questions
Explore questions in the Mechanical Engineering category that you can ask Spark.E!
As the height/depth of a fluid above a surface __________, the pressure exerted by the fluid on that surface __________.
What two things must you know to calculate the pressure exerted on a surface?
medical imagining such as MRI, PET, CT scans are the interactions of electromagnetic fields with living tissues for medical imaging, therapeutics and physiological function is __________
biomaterials may contain _________ and/or ______ to provide a more biological match for the living tissue is called tissue engineering
Requirements for all aircraft flying into, within or across the contiguous US, ADIZ must be equipped with...
An ATC transponder is not to be used unless it has been tested, inspected and found to comply with regulations within the preceding...
Whenever the FAA administrator determines that an emergency conditions exists relating to the FAA's ability to operate the air traffic control system, such that normal flight operations cannot be conducted safely and efficiently...
The CG of an aircraft can be determined by which of the following methods?
When an aircraft is VFR, in a distress or urgency situation, and in radio contact with an air traffic facility or other agency providing air traffic services, the pilot should...
A coded transponder equipped with altitude reporting equipment is required for?
Approved flotation gear, available to each occupant, is required on each aircraft if it is being flown for hire over water...
Unless otherwise authorized, the pilot in command is required to hold a type rating when operating any...
Weight A - 155 lbs @ 45" aft of datumWeight B - 165 lbs @ 145" aft of datum Weight C - 95 lbs @ 185" aft of datumBased on this information, where would the CG be located aft of the datum?
If you become doubtful about your position, fuel endurance, weather, or any other condition that could adversely effect flight safety, the FAA considers this to be...
While on an IFR flight plan and flying in IMC, you realize your communications radio is no longer functioning. ATC has not assigned you a route nor advised you to expect a route in a further clearance, and you are not being radar vectored. How should you continue your flight?
You are preparing to fly under a Oart 135 operation. Upon checking the weight and balance data during your preflight inspection, you notice that the current empty weight and center of gravity were calculated from values established by weighing of the aircraft 2 years and 2 months ago. Can you legally fly the plane?
You are preparing to fly a multi-engine airplane. The aircraft weighs less than the maximum takeoff weight and its CG is within limits, but it has exceeded the zero fuel take off weight. Why is this a problem?
Empty weight (oil is included) 1272lbsEmpty weight moment (in-lb/1000) 102.04Pilot and copilot 400Rear seat passenger 140Cargo 100Fuel 37 gallons Is the airplane loaded within limits?
When aircraft equipment is changed, the person making the equipment change must make an entry indicating the items added, removed, or relocated; the date of the change; and the persons name and certification number. In which document should this information be recorded?
When computing weight and balance, the basic empty weight includes the weight of the airframe, engine(s), and all installed optional equipment. Basic empty weight also includes...