Mechanical Engineering Questions
Explore questions in the Mechanical Engineering category that you can ask Spark.E!
On CPCS aircraft in STBY mode, the FLT/GRD switch when set to GRD causes:
During a climb to 35,000 ft, the aircraft is required to level at 25,000 ft. for ten minutes. When operating in the AUTO mode, the cabin altitude will.
The air conditioning pack switch positions are:
On CPCS aircraft, if the FLT/GRD switch is inadvertently moved to the GRD position while in flight the cabin altitude will:
On CPCS aircraft, if the pressure controller is selected to Standby Mode after takeoff and the Cabin Altitude is set at 8000 feet. The aircraft is directed to stop the climb at FL140. The cabin altitude will:
the forward outflow valve position while recirc fan operating
On CPCS aircraft, the rate of operation of the main outflow valve in MAN DC mode is?
On CPCS aircraft, the Cabin Rate selector DECR, INCR and INDEX positions give a cabin altitude rate of change of:
The maximum altitude for battery start of the APU: (emergency electrical configuration)
Maximum altitude with flaps or slats extended
The max altitude the APU may be started (with normal A/C power supply).
max pressure altitude for an APU ground start and operation:
Maximum allowed fuel imbalance before checking COM: 319/320
A321 Taxi SpeedMax speed during a turn if weight > 167,550 lbs
Air bleed extraction from the APU for wing anti-ice:
Max wind before cargo door must be closed
Max altitude landing gear may be extended
Aircraft accident and incident investigation
Aircraft Nationality and registration marks
Meteorological Service for International Air Navigation